The call(..) pointcut designator is now implemented
only at the call site; by contrast, the AspectJ 1.0 compiler could
also implement it on the callee side. So in 1.0 if you
compiled a pointcut using call(..) but only passed
the compiler the code for the target of the call, the pointcut
could be implemented. This is not true for 1.1. To fix this,
use execution(..) in place of call(..),
or include all calling clients in the compile.
(more info)
Type-patterns are no longer permitted for the defining type of inter-type declarations. Replace the pattern with a type. In many cases, you can declare members on an interface type, and then declare that the types picked out by the type-pattern implement have the interface as their parent. (more info)
Type-patterns are no longer permitted when specifying
declare soft.
Replace the pattern with a literal type.
Wildcards patterns (foo..*) are no longer
permitted for
this(),
target(), or
args().
Replace the pattern with a literal type or
with a subtype wildcard (Type+).
(more info)
Conflicts will be reported for no-argument constructors generated by compilers when no constructor is defined for a class. That means the following code will compile in 1.0 but not in 1.1:
class C {}
aspect A {
C.new() {} // permitted in 1.0; conflict in 1.1
}
One fix is to declare a non-conflicting constructor
by adding arguments (or defining a constructor in the
target class); a better fix might be to do the work of the
declared constructor in advice on the initialization
join point for the object.
(more info)
The pointcut designators
within() and withincode()
will not pick out
code within the lexical extent of method-local
and anonymous inner types (because these are not
represented as such in bytecode form). Because
within forms specify staticly-determinable pointcuts,
they might be used in declare error or declare warning
statements, which might produce different results.
(more info)
The compiler will report an error that
the form aspect {name} dominates {list}...
is no longer supported. It has
been replaced by a new declare statement:
declare precedence : {name} {list}...
(more info)
The field set join point now has a return type of void.
Compiling programs using around advice on these join points might
cause errors unless the return type of the around advice
and the result of any proceed() call is
Object or void.
(more info)
The compiler cannot implement after or around advice for the handler PCD because the end of exception handlers is ambiguous in bytecode. Try to use before advice. (more info)
In versions of AspectJ prior to 1.0.4, the compiler was not correctly implementing the AspectJ-1.0 language design for some uses of after returning advice.
The main change that was made was of after returning advice for constructor execution join points. Previously, this advice was legal:
after() returning (Foo f): execution(Foo.new(..)) { ... }
However, it has always been a part of the 1.0 language design (and
of Java's language design) that constructors themselves (as opposed to
constructor calls) do not return the value of the new object. Rather,
this is bound to the new object, and the constructor
behaves like a void method. With that in mind, any code like the
above should be conveted to the form.
after(Foo f) returning: this(f) && execution(Foo.new(..)) { ... }
In compilers prior to 1.0.4, the following advice could pick out join points
after() returning (String s): call(void foo()) { ... }
This is no longer picked out. This pattern was most commonly used in highly polymorphic contexts, such as
after() returning (String s): call(* foo()) { ... }
If you want to capture all calls, binding null objects for those
that would otherwise have no value, you must use the
Object type.
after() returning (Object o): call(* foo()) { ... }
Uses of both of these forms are highleted with compiler warnings in the 1.0.4 compiler.
Aspects can no longer be declared to implement the
Serializable or Cloneable interfaces. If
you previously used serializable or cloneable aspects, you should
refactor your code to keep the state you need to serialize or clone in
objects associated with the aspects.
The static modifier is no longer allowed on pointcut
declarations anywhere. Porting is simple; just remove the static
declarations when you find them.
Also, though the returns modifier on pointcuts has
not been part of the language since 1.0alpha1, the compiler still
accepted them until now. If you used this feature, now is the right
time to remove the returns modifier when the compiler
complains about it.
The release of AspectJ 1.0alpha1 involved sweeping cleanups of the language to bring it to 1.0 status.
One of the most pervasive changes in porting code written before 1.0alpha1 is the change in some of the pointcut names from plural to singular, that is, they lose an "s". In one sense, making this change in your programs is easy: just go through and whever you see uses of the pointcuts
calls executions gets sets handlers initializations staticinitializations
Just take off the final "s", to make one of
call execution get set handler initialization staticinitialization
Often, there will be other changes you should make for each of these pointcuts, but as for the name, just take off the "s".
One risk you will have when doing this is creating name conflicts. If, for example, you named a parameter of a pointcut "set", you should (for your own sanity -- the compiler doesn't require it) rename it in the rewritten pointcut.
pointcut sort(Collection set): calls(void addAll(set)); ==> pointcut sort(Collection mySet): call(void addAll(mySet));
While converting to use singular nouns for the primitive pointcuts, you may also want to remove the "s" from your user-defined pointcuts.
pointcut publicCalls(): calls(public * *(..)); ==> pointcut publicCall(): call(public * *(..));
Of course, your naming conventions are your own, but throughout these porting notes we will be making these changes in our example ports.
Perhaps the largest semantic change in the 1.0 language is the removal of receptions join points. They have been merged with call join points in AspectJ 1.0, so now a call join point doesn't represent the "caller-side" of a call, but the call itself, both caller and receiver.
Changing code that used the receptions pointcut should be
fairly straightforward, depending on whether the pointcut exposed state or
not.
Receptions pointcuts that did not expose state can simply be
replaced by the new call and target pointcuts:
receptions(void Foo.m()) ==> target(Foo) && call(void m())
Some receptions pointcuts exposed the receiving object by
replacing the receiving type with a pointcut formal. These PCDs
should be rewritten to use the new target pointcut to expose
the receiving object.
pointcut fooCallees(Foo f): receptions(void f.m()); ==> pointcut fooCallee(Foo f): target(f) && call(void m());
Like other pointcuts,
receptions pointcuts that exposed one or more arguments should be
rewritten to use the args pointcut:
pointcut intPassers(int i, int j): receptions(void Foo.m(i, j));
==>
pointcut intPasser(int i, int j):
args(i, j) && target(Foo) && call(void m(int, int));
There are two issues with constructor receptions in particular.
Like constructor calls,
constructor receptions pointcuts had a dynamic character, in that
receptions(C.new()) would capture constructions of not
only C classes, but also of classes that extended C.
If you want this behaviour, then you need to use the new subtypes operator, +, on the type name in question. So,
receptions(C.new()) ==> call(C+.new())
Also like constructor calls,
constructor receptions allowed access to the constructed object in the
same way as any other object. Since the only advice possible on
constructor receptions join points was after returning
advice, the object was always guaranteed to be there. But since
constructor call join points allow all kinds of advice it may be that
the object isn't constructed yet (say, in before or around advice).
This is a benefit, in that it allows caching constructed objects
aspect Singleton {
private C theC = null;
C around(): call(C.new(..)) {
if (c == null) theC = proceed();
return theC;
}
}
but it does require some rewriting. The new object can be accessed as the return value in after returning advice. So,
after(Point p) returning (): receptions(p.new(int, int)) { ... }
==>
after() returning (Point p): call(Point+.new(int, int)) { ... }
In previous versions of AspectJ, state such as the currently executing object or a particular argument of a method call could be accessed from the signatures of many pointcuts, leading to difficult-to-read forms. In AspectJ 1.0, all state accesses now use only three pointcuts
args this target
which pick out argument values, the currently executing object, and the target object of a method call or field operation, respectively.
Any time you have a pointcut that has a signature where one of the
arguments was a pointcut or advice formal, just replace that formal
with its type and add an args pointcut.
pointcut intPassers(int i, int j): calls(void Foo.m(i, j)); ==> pointcut intPasser(int i, int j): args(i, j) && call(void Foo.m(int, int));
pointcut stringPassers(String s): receptions(void Foo.m(s, ..)); ==> pointcut stringPasser(String s): args(s, ..) && call(void Foo.m(String, ..));
If a calls pointcut exposed the the receiving object, such as
pointcut fooCallees(Foo f): calls(void f.m());
then the new version should use the target pointcut
to get at that object
pointcut fooCallee(Foo f): target(f) && call(void Foo.m());
AspectJ's calls pointcut previously allowed the new object to be
exposed, even though it may not have been constructed yet. AspectJ
1.0 no longer allows this; you can access the new instance only in
after returning advice, when it is guaranteed that the object was
successfully constructed. So instead of using the target
pointcut to expose the value, you should use the normal after
returning mechanism:
after(Point p) returning (): calls(p.new(int, int)) { ... }
==>
after() returning (Point p): call(Point+.new(int, int)) { ... }
Exposing the target object of a gets or
sets pointcut should be done the same way it was for
calls pointcuts, with the new target
pointcut.
before(Frame f): gets(Color f.color) { ... }
==>
before(Frame f): target(f) && get(Color Frame.color) { ... }
before(Frame f): sets(Color f.color) { ... }
==>
before(Frame f): target(f) && set(Color Frame.color) { ... }
In addition, the clumsy syntax for getting the old value of the field has been eliminated. For before advice, the port is simple; just access the field yourself in the body. Depending on the rest of your system, you may need to restrict the advice from the aspect body to eliminiate the circularity.
aspect A {
before(Frame f, Color c): gets(Color f.color)[c] { ... }
}
==>
aspect A {
before(Frame f):
target(f) && get(Color Frame.color) && !within(A) {
Color c = f.color;
...
}
}
The same can be done for around advice. However, the
only way to port after advice that needs the old value is to convert
it to around advice.
aspect A {
after(Frame f, Color c) returning (): gets(Color f.color)[c] { ... }
}
==>
aspect A {
void around(Frame f):
target(f) && get(Color Frame.color) && !within(A) {
Color c = f.color;
proceed(f);
...
}
}
When porting sets pointcuts, the new value of a field
is still available, but not the way it was previously. Instead of
using the square bracket syntax, we use an args pointcut.
All set join points are assumed to have exactly one argument, which
holds the new value. So,
after(Color newColor): sets(Color Frame.color)[][newColor] { ... }
==>
after(Color newColor): args(newColor) && set(Color Frame.color) { ... }
Also, if the field was declared private, in order to get at its
old value the aspect must be declared privileged.
The value of the exception at an exception handler join point is
now accessed through the args pointcut; all exception
handler join points are treated as having exactly one argument, the
exception value. So,
before(NotFoundException e): handlers(e) { ... }
==>
before(NotFoundException e): args(e) && handler(NotFoundException) { ... }
The within pointcut was not typically used to export
context. Though it was accidentally possible to do so in versions of
AspectJ before 1.0, it often didn't do what users expected it to.
This loophole has now been closed, and within can only take type
patterns, not pointcut or advice formals. A use of the
this pointcut will capture what previous implementations
did:
pointcut usesFoo(Foo f): within(f); ==> pointcut usesFoo(Foo f): this(f) && within(Foo);
Now that we have this, target, and
args pointcuts, all of our signatures are composed of
just types, names, and wildcards; there are no more parameters.
Also, now that we have the + wildcard to pick out
subtypes, we can make signature
matching much more uniform.
Previously, some signatures matched based on subtypes, some based on instanceof, and some exactly. Now, we have made all signatures match exactly.
What does this mean for your program? Well, it means that you
may have to add + to some of your signatures, depending
on what you meant them to match.
For example, the pointcut
calls(void m(Object))
previously picked out all method calls to a method named m that took one argument, which was a subtype of Object. Now, however, it will only pick out method calls to methods that are defined to take exactly the type Object, which may be a lot fewer join points. If you want the old behaviour, simply convert to
call(void m(Object+))
The intanceof pointcut has been split into two different
pointcuts, this and target.
Typically, the instanceof pointcut would only exist in a compound
pointcut, composed (with &&) with another
pointcut. If the other pointcut was a receptions
pointcut, then instanceof should be converted to
target (and receptions converted to
call). So,
pointcut stateChanges(Subject s):
instanceof(s) && receptions(void Button.click());
==>
pointcut stateChange(Subject s):
target(s) && call(void Button.click());
In all other cases, instanceof referred to the
currently executing object, and so should be converted into
this
before(Point p): instanceof(p) && executions(* makePolar(..)) { ... }
==>
before(Point p): this(p) && execution(* makePolar(..)) { ... }
pointcut setup(Client c): instanceof(c) && calls(Remote Naming.lookup(String)); ==> pointcut setup(Client c): this(c) && calls(Remote Naming.lookup(String));
Object initialization join points are now more complicated, and more true to Java's execution model. Now they bracket all of the initialization that a class can do, after the return of its super constructor call (before which no initialization can happen). Previous versions of AspectJ had object initialization join points that only included initialization that was made in dynamic initializers and fields.
The old behaviour can be recovered with a simple rewrite.
initializations(A) ==> initialization(A.new(..)) && !execution(A.new(..))
Previously, constructor call join points were matched by subtypes,
so calls(Foo.new()) would match both calls to create new
Foo objects, and new SubFoo objects. The
new call pointcut designator matches types exactly, so if
you want the old behaviour, you should write
call(Foo+.new()).
Similarly, constructor execution join points were matched by
subtypes. So the old executions(Foo.new()) is now
represented by execution(Foo+.new()).
In both of these cases, think before using the + operator; it may be that you didn't intend subtype matching in the first place.
The hasaspect pointcut is no longer defined, but you
can get the same behaviour using the new if pointcut.
If the aspect whose presense you are checking for was defined
of eachcflow, of eachcflowbelow, or, more
unlikely, of eachJVM(), then the conversion is simple:
hasaspect(A) ==> if(A.hasAspect())
If the aspect was defined of eachobject, then you
will have to expose the current object in your pointcut or advice
parameters:
pointcut cut(): hasaspect(A) ... ; ==> pointcut cut(Object o): this(o) && if(A.hasAspect(o)) ... ; or pointcut cut(Object o): target(o) && if(A.hasAspect(o)) ... ;
If you were using the hasaspect pointcut to expose
the state of the aspect, then you can get the same state by using
A.aspectOf() in the body of the advice. For example, if
the aspect A were defined of eachcflow, then
before(A myA): hasaspect(myA) {
myA.checkStatus();
}
==>
before(): if(A.hasAspect()) {
A myA = A.aspectOf();
myA.checkStatus();
}
The withinall poinctut is no longer defined. You can use a combination of within and the new subtypes operator, +, instead. You'll save two characters and be using a simpler and more orthogonal language.
withinall(Foo) ==> within(Foo+)
The returns keyword is no longer necessary for user-defined pointcuts. Simply remove it when you find it.
pointcut publicIntCalls() returns int: calls(public int *(..)); ==> pointcut publicIntCall(): call(public int *(..));
In Java, only static members may be accessed by their declaring
type name, like the static method Math.max() can be
accessed.
Pointcuts now have that property too. Pointcuts may be declared
to be static, in which case they can be accessed like
MyAspect.move(), or they can be left non-static, in which
case they can be overridden by a subaspect.
In addition, while pointcuts can still be defined in classes, only
static pointcuts can be defined in classes.
Porting should be straightforward; just make all your pointcuts in
classes static, and make any pointcut with a qualified
reference static.
Previous versions of AspectJ treated * and .. too cleverly in type patterns, placing restrictions based on what is a package and what is a type, and basing their meanings on the definition of a package hierarchy.
In AspectJ 1.0, both of these wildcards are defined simply, and textually:
That's it.
This change won't affect most programs, but it will make
understanding programs easier. There is one ugly idiom, however, that
this change disposes of. If your program includes the type pattern
*..*, which used to match all types, you can replace it with the
much simpler *.
pointcut unaryVoidMethods(): call(void *(*..*)); ==> pointcut unaryVoidMethod(): call(void *(*));
The new + operator is used to normalize the many places you want to use subtypes of some types.
In introduction forms, you will need to replace
subtypes(TypePattern) type patterns with the
new subtype operator, +. In the case where you wrote
subtypes(Foo), i.e., the subtypes of a single type,
simply replace this with Foo+. Otherwise, use the
+ operator as appropriate in TypePattern.
public void (subtypes(Target0 || Target1)).accept(Visitor v) {
v.visit(this);
}
==>
public void (Target0+ || Target1+).accept(Visitor v) {
v.visit(this);
}
The returns keyword is no longer used for around advice. Instead, the return type is declared as it is for methods. So,
around(Point p) returns void: setters(p) { ... }
==>
void around(Point p): setter(p) { ... }
Around advice must now declare the checked exceptions it throws
with a throws clause, much like a method.
char around(char c) throws java.io.CharConversionException: converter(c) {
char result;
try { result = proceed(); }
catch (Exception e) {
throw new java.io.CharConversionException();
}
if (result == 0) throw new java.io.CharConversionException();
return result;
}
In previous versions of AspectJ, advice precedence within an
aspect was simple: if a piece of advice appeared before another piece,
it was more precedent. This made perfect sense for
before and around advice, but was the cause
of confusion (even among the AspectJ designers, more than once) for
after advice, as it seemed backward.
In addition, advice was ordered by kind, in that around advice always surrounded before and after advice.
AspectJ 1.0 has changed this; precedence for after
advice is inverted, and advice is no longer ordered by kind.
This won't matter to you unless you write pieces of advice in the same aspect that apply to the same join point.
If you do, here's what to think about: If you're looking at two
pieces of advice and want to know which has precedence, if either is
after advice, then the second one has precedence.
Otherwise, the first does.
This allows interesting advice interaction. In the following
advice, for example, the after throwing advice will catch
the exception thrown by the before advice
aspect A {
before(): call(void main(..)) {
throw new RuntimeException();
}
after() throwing(RuntimeException e): call(void main(..)) {
System.err.println("caught you!");
}
}
But reversing the order will give the before advice
more precedence, making its exception uncatchable by the after
throwing advice
aspect A {
after() throwing(RuntimeException e): call(void main(..)) {
System.err.println("missed you!");
}
before(): call(void main(..)) {
throw new RuntimeException();
}
}
Advice in different aspects is ordered by the normal aspect
precedence rules of subtyping and the dominates modifier.
If you use after returning advice and do not need to expose the return value, you no longer need to write an empty set of parentheses to indicate that fact. So,
after(Formals) returning (): Pointcut { ... }
==>
after(Formals) returning: Pointcut { ... }
The same syntax is now available for after throwing advice, in
case you do not care what Throwable is thrown.
after(Formals) throwing: Pointcut { ... }
thisStaticJoinPoint has been renamed
thisJoinPointStaticPart, to reflect that it is now
exactly the static part of thisJoinPoint: It will return
the same object as thisJoinPoint.getStaticPart().
The JoinPoint object hierarchy has been folded into a
single class, org.aspectj.lang.JoinPoint. A common
pattern in logging, for example, was
before() executions(* myMethod()) {
ExecutionJoinPoint jp = (ExecutionJoinPoint)thisJoinPoint;
CodeSignature jp = (CodeSignature)jp.getSignature();
System.err.println(jp.getParameters());
System.err.println(jp.getParameterNames());
}
While there is still a rich hierarchy for signatures, there is
only one JoinPoint type, so this can be rewritten as:
before() executions(* myMethod()) {
JoinPoint jp = thisJoinPoint;
CodeSignature jp = (CodeSignature)jp.getSignature();
System.err.println(jp.getArgs());
System.err.println(jp.getParameterNames());
}
Some of the method names of JoinPoint have been
reorganized, as well.
The keywords +implements and +extends no
longer exist. Instead, AspectJ uses the declare
form for exactly the same functionality.
Point +implements Serializable; => declare parents: Point implements Serializable;
MyButton +extends ButtonAdaptor; => declare parents: MyButton extends ButtonAdaptor;
Around advice advice no longer effects the static exception checking of Java. This means that the following code previously compiled:
class C {
void noExceptionDeclared() {
exceptionDeclared();
}
void exceptionDeclared() throws IOException {}
}
aspect A {
around(): call(void C.exceptionDeclared()) {
try { proceed(); }
catch (IOException e) {}
}
}
even though the class C is not compilable on its own (because noExceptionDeclared actually throws an Exception).
AspectJ now firmly places everything that affects the type system of Java, including the declared-exception checking system, into the space of introduction and declare. So, in order to state that the call to exceptionDeclared() will not, actually, throw an exception, we now "soften" that exception, that is, take it out of the space of declared exceptions.
declare soft: ExceptionType: Pointcut;
The pointcuts allowed here are limited; you cannot use pointcuts that would require runtime information. But picking out method calls is just fine. So in order to make the above example work, one new declaration is needed:
declare soft: IOException:
call(void C.exceptionDeclared()) &&
withincode(void noExceptionDeclared());
The syntax of "of each" modifiers has changed. For of
eachcflow and of eachcflowbelow, you can simply
replace "of each" with "per". So,
aspect A of eachcflow(...) { ... }
==>
aspect A percflow(...) { ... }
If you have any aspects defined of eachJVM(), then
you should either remove that declaration entirely (because this is
the default behaviour), or replace the of eachJVM()
declaration with an issingleton declaration.
aspect of eachJVM() { ... }
==>
aspect A { ... }
or
aspect A issingleton { ... }
The of eachobject(Pointcut) modifier has
been split into two different forms, of
perthis(Pointcut) and of
pertarget(Pointcut). Which one you replace with
depends on the Pointcut you use.
If you use a pointcut that picked out reception join points, then
use pertarget, and rewrite the pointcut to pick out call
join points. So
aspect Shadow
of eachobject(receptions(void Point.setX(int)) ||
receptions(void Point.setY(int))) {
...
}
==>
aspect Shadow pertarget(call(void Point.setX(int)) ||
call(void Point.setY(int))) {
...
}
Otherwise, in most cases, use perthis. When you
convert, remember the meaning of each of these modifiers.
perthis(Pointcut) indicates that an instance
of the aspect should be associated with every object that is
this at each of the join points picked out by
Pointcut, while pertarget(Pointcut)
associates with every object that is the target object at such join
points.
The following changes are only required when porting code written prior to the 0.8beta3 release of AspectJ.
Changing pre-0.8beta3 code that uses AspectJ's control-flow-based
features only requires rewriting occurrences of
eachcflowroot, cflow, and
cflowtop. No editing of other aspect code is
necessary.
The aspect modifier "of
eachcflowroot(Pointcut)" should now be written more
as "percflow(Pointcut)".
In previous versions of AspectJ, the pointcut
cflow(Pointcut) picked out all join points in
the cflow below the join points of Pointcut. That is, it
did not include the join points of Pointcut, only the join
points in their control flow.
As of version 0.8beta3,
cflowbelow(Pointcut) has that behavior.
cflow(Pointcut) includes the join points of
Pointcut.
In many cases, you may not care whether the points of
Pointcut are included or not, and so can safely leave
cflow(Pointcut) pointcut designators alone.
However, if you use the idiom
Pointcut && ! cflow(Pointcut)
to capture the non-recursive entries to a particular pointcut, you will definitely want to rewrite that as
Pointcut && ! cflowbelow(Pointcut)
The primitive pointcut designator
cflowtop(Pointcut) has been removed from the
language, as it is expressible with cflow or
cflowbelow. All uses of
cflowtop(Pointcut) can be rewritten as:
cflowbelow(Pointcut && ! cflowbelow(Pointcut))
Though in most cases the following is sufficient
cflow(Pointcut && ! cflowbelow(Pointcut))
In previous versions of AspectJ, a concrete aspect would implicitly override all of its abstract pointcuts with an empty pointcut. AspectJ 0.8beta3 enforces the restriction that a concrete aspect may not have any abstract pointcuts. Thus the following extension:
abstract aspect A {
abstract pointcut pc();
}
aspect B {}
will no longer compile.
Adding the new empty pointcut designator
pointcut Id();
in the declaration of the concrete aspect fixes this problem.
abstract aspect A {
abstract pointcut pc();
}
aspect B {
pointcut pc();
}
Previously, the compiler silently refrained from applying a piece of advice to join points within its own advice body. So, for example, in
class C {
static int i;
}
aspect A {
before(): gets(int C.i) {
System.err.println("C.i was " + C.i)
}
}
The advice would trace all references of the static field
C.i except those in the body of the before.
The compiler has now removed this special case, and so running the
above example will now cause a StackOverflowException to
be thrown.
Most cases of this error can be fixed by correctly specifying the
desired pointcut: In the above example, the intention is clearly not
to trace all references of C.i, just those
outside the aspect.
class C {
static int i;
}
aspect A {
before(): get(int C.i) && ! within(A) {
System.err.println("C.i was " + C.i)
}
}
In a very few cases, you may want the advice to be applicable to other code in the aspect, but not in the particular piece of advice. In such cases, you can pull the body of the advice into a method and restrict away from that method (and away from calls to that method):
class C {
static int i;
}
aspect A {
public static int getCi() {
return C.i; // will be traced
}
before(): get(int C.i) &&
! withincode(void A.traceCi())
! call(void A.traceCi()) {
traceCi();
}
private void traceCi() {
System.err.println("C.i was " + C.i) // will not be traced
}
}
The following changes are only required when porting code written prior to the 0.8beta1 release of AspectJ.
The syntax of introduction has changed. Porting most programs should require some simple editing. Anywhere you have an introduction block
introduction GTN {
...
}
simply move the GTN down into the introduction declarations and remove the block.
For method introduction, place the GTN in front of the
method name, For field introduction, place the GTN in front
of the field name, and for constructor introduction, place the
GTN in front of the new identifier.
introduction Foo {
public void doStuff() { this.doStuffLater(); }
public int calorieCount = 3;
public new(int x) { super(); calorieCount = x; }
}
==>
public void Foo.doStuff() { this.doStuffLater(); }
public int Foo.calorieCount= 3;
public Foo.new(int x) { super(); calorieCount = x; }
For implements and extends introduction, move the GTN
in front of the new identifiers implements or
extends, and place that in a declare parents
form.
introduction Foo {
implements Comparable;
extends Goo;
}
==>
declare parents: Foo implements Comparable;
declare parents: Foo extends Goo;
In all cases, if the GTN is just a type name, it can be
moved down on its own. However, if the GTN uses any of
&&, ||, and !, it must
be parenthesized.
introduction subtypes(Foo) && !Goo {
int x;
}
==>
int (Foo+ && !Goo).x;
If you had an introduction that was referring to private or
protected members of the target class, this will no longer work. You
will either need to modify your code to avoid this accessibility
issue, or you will need to use the privileged modifier on
the aspect that contains the introduction.
class Counter {
private int count = 2;
}
aspect ExposeCountersPrivates {
introduction Counter {
public int getCount() { return count; }
}
}
==>
// in 0.8, only privileged aspects can expose a class's privates
privileged aspect ExposeCountersPrivates {
public int Counter.getCount() { return count; }
}
If you have introduced private or package-protected members, you will probably have to re-write some code. Most previous uses of introducing privates can be improved by using private introduction instead.
class C {
}
aspect AddCounter {
introduction C {
private int count;
public int getCount() { return count; }
}
}
==>
aspect AddCounter {
private int Counter.count;
public int Counter.getCount() { return count; }
}
There is one case that we know of where the inability to perform
the introduction of private members makes 0.7 code difficult to
port to 0.8. If you were using the introduction of a private
void writeObject(..) or a private void
readObject(..) method to interact with Java's serialization
API, you will need to come up with an alternative design. Using some
combination of Externalizable,
writeReplace(..) and/or readResolve(..)
methods should allow you to port your code. If you find this isn't
the case, we'd like to hear about it.
If you were introducing either a protected member or a package-private member onto a class in order to override a protected member that was inherited from a superclass, you will have to make this introduction public.
Static advice has been removed from the language. Now, every piece of advice is non-static, meaning that it will run in the context of an aspect instance.
If you have an aspect that only contains static advice, has no "of" clause or is declared "of eachJVM()", and is not extended by another aspect, simply remove the keyword "static" from all pieces of advice, and make sure the aspect is not defined with the "abstract" modifier.
aspect Tracing {
static before(): executions(* *(..)) {
System.out.println("Got Here! " + thisJoinPoint);
}
}
==>
aspect Tracing {
before(): execution(* *(..)) {
System.out.println("Got Here! " + thisJoinPoint);
}
}
Otherwise, if you have an aspect contains both static and non-static advice, is extended, or is "of eachObject(...)" or "of eachcflowroot(...)", you should group your static advice together and put it in a new aspect, possibly even an inner aspect.
aspect ComplexTracing of eachobject(cflow(executions(void Main.main(..)))) {
static before(): executions(* *(..)) {
System.out.println("Got Here! " + thisJoinPoint);
}
static after(): executions(* *(..)) {
System.out.println("Returned! " + thisJoinPoint);
}
// some other dynamic advice, fields, etc
}
==>
aspect ComplexTracing of eachobject(cflow(executions(void Main.main(..)))) {
static aspect AlwaysTracing {
before(): execution(* *(..)) {
System.out.println("Got Here! " + thisJoinPoint);
}
after(): execution(* *(..)) {
System.out.println("Returned! " + thisJoinPoint);
}
}
// some other dynamic advice, fields, etc
}
Aspects can now only extend abstract aspects. This restriction
may cause some redesign of aspect hierarchies. You will probably find
that for the majority of your code the most serious change this
requires is to add an explicit abstract modifier to a
super-aspect that was already implicitly abstract.
aspect BaseTracing {
abstract pointcut traced();
before(): traced() {
System.out.println("Got Here! " + thisJoinPoint);
}
}
==>
// make this abstract aspect explicitly abstract
abstract aspect BaseTracing {
...
}
This change has also affected the getAspect static
method. Now, getAspect is only defined on non-abstract
aspects. Previously, you could call getAspect on an
abstract superaspect and (sometimes) get an instance of a subaspect
back.
This pattern was used in the Spacewar example in the AspectJ distribution. We had the class hierarchy
SpaceObject (abstract)
|- Ship
|- Bullet
|- EnergyPellet
And the aspect hierarchy
SpaceObjectDA (abstract)
|- ShipDA of eachobject(instanceof(Ship))
|- BulletDA of eachobject(instanceof(Ship))
|- EnergyPacketDA of eachobject(instanceof(Ship))
And we would call SpaceObjectDA.getAspect(SpaceObject) to access
the aspect associated with a ship, bullet, or energy pellet. This
pattern depended on the SpaceObjectDA aspect hierarchy
exactly mirroring the SpaceObject hierarchy, and being
maintained that way.
A better way to implement this kind of design aspect is to use private introduction, a new feature of AspectJ.
A common pattern for AspectJ programs that need to associate some
state with every object of a particular type has been to use aspects
that are defined of eachobject(instanceof(...)). A prime
example of this was the BoundPoint aspect of the bean
example: which needed to associate each point with a
PropertyChangeSupport object.
aspect BoundPoint of eachobject(instanceof(Point)) {
java.beans.PropertyChangeSupport support = null;
after() returning(Point p): receptions(p.new(..)){
support = new PropertyChangeSupport(myPoint);
}
around(Point p) returns void: receptions(void p.set*(*)) {
// code that uses support
}
}
In the new version of AspectJ, a better way of accomplishing many
of these state association is to use privately introduced fields.
Instead of creating an aspect instance for every Point
object, store the PropertyChagneSupport object in the
Point objects themselves.
aspect BoundPoint {
private PropertyChangeSupport Point.support = new PropertyChangeSupport(this);
void around(Point p): setters(p) {
// code that uses p.support
}
}
Just as in the past, the PropertyChangeSupport object is not accessable to anyone but the aspect, but now less mechanism is needed.
There are times when changing aspects that are defined of
eachobject(instanceof(...)) may not be reasonable. If the
aspect instance is stored or passed to other methods, then having a
real of eachobject(instanceof(...)), now written
perthis(this(...)), association may capture the
crosscutting concern best.
The following changes are only required when porting code written prior to the 0.7beta11 release of AspectJ.
In AspectJ 0.7beta11, the two-argument calls
primitive pointcut designator was deprecated. Removing these
designators will require different cases depending on what the
original pointcut did.
For pointcuts denoting calls to particular static methods, such as
calls(String, static String valueOf(int)) // deprecated
the transformation is easy. Simply make the desired signature
explicit. Instead of catching all calls to any static method that
happens to have the signature String valueOf(int), catch
calls to that exact method defined in the String class.
call(static String String.valueOf(int))
Pointcuts denoting calls to classes of static methods can also be rewritten with these rules. For example,
calls(my.package.*, static * get*(..)) // deprecated
should now be written
call(static * my.package.*.get*(..))
Many pointcuts denoting calls to non-static methods can be fixed the same way that those pointcuts denoting calls to static methods are fixed. So,
calls(Thread, int getPriority()) // deprecated
which denotes all calls to nullary int methods named getPriority
when the called object is an instance of the Thread type,
can almost always be rewritten
call(int Thread.getPriority())
which denotes all calls to the nullary int Thread.getPriority()
method.
Expanding the signature picks out slightly different join points
than the original two-argument form. This won't matter for most
programs, but in some cases the differences may be noticable. In
particular, the expanded-signature form only picks out those calls
where the called object is statically typed to Thread
when its int getPriority() method is called. If you want
to capture calls to the int Thread.getPriority() method,
regardless of how the called object is statically typed, you shoud use
the different translation:
call(int getPriority()) && target(Thread)
This will capture all call join points of methods with signature
int Thread.getPriority().
It will also denote any join points if the Thread type does not
define (possibly abstractly) some int getPriority()
method, though.
The simplest way to remove an advice declaration from a class is to simply define the advice declaration in an inner aspect. So, instead of
class C {
static before(): executions(C.new()) { ... } // deprecated
}
write
class C {
static aspect ConstructionProtocol {
static before(): executions(C.new()) { ... }
}
}
If your advice doesn't refer to any inner classes or interfaces of C, you can move the inner aspect out of the class entirely.
class C { ... }
aspect ConstructionProtocol {
static before(): execution(C.new()) { ... }
}
Your code will be clearer if you consider the purpose of each piece of advice when you make this change. It may be that some of the advice naturally belongs to another aspect, perhaps already existing. Or it may be that some pieces of advice in a class are associated to one concern and some to another; in which case more than aspect would be appropriate.
The following changes are only required when porting code written prior to the 0.7beta10 release of AspectJ.
In AspectJ 0.7beta10, access to the reflective object
thisJoinPoint substantially changed. The two parts of
this change were the elimination of the runNext() static
method, and the use of an interface hierarchy represent the join point
object.
thisJoinPoint.runNext() to
proceed() The elimination of the runNext() static method
requires almost no porting work. An automatic replacement of the
string
thisJoinPoint.runNextwith the string
proceed will do the job. However, if any around advice used the
identifier "proceed" as a formal parameter or local
variable, it must be renamed, and if any aspect used it as a field,
then references to the field in around advice should be made explicit
(prefixing the reference with the aspect name or "this",
depending on whether the field is static or not).
thisJoinPoint While access to reflective information through
thisJoinPoint is more powerful and regular through its
interface hierarchy, the previous uses must be rewritten. Changing
your code will likely require manual editing, but in doing so your
code should get simpler and cleaner.
Many existing uses of the fields on join points can be re-written to use one of:
thisJoinPoint.toString()thisJoinPoint.toShortString()thisJoinPoint.toLongString()thisJoinPoint.getSignature().toString()thisJoinPoint.getSignature().toShortString()thisJoinPoint.getSignature().toLongString()For example:
System.out.println(thisJoinPoint.className + "." +
thisJoinPoint.methodName)
can be replaced with
System.out.println(thisJoinPoint)or
System.out.println(thisJoinPoint.getSignature().toShortString())with comparable behavior.
Accesses to the parameters field of join points should be changed as follows. A field access like:
thisJoinPoint.parametersmust be changed to:
thisJoinPoint.getArgs()Accesses to the methodName and className fields of join points that are not suitable for replacement with a toString method, should be changed as follows. Field accesses like:
thisJoinPoint.classNamethisJoinPoint.methodNamemust be changed to:
thisJoinPoint.getSignature().getDeclaringType().getName()thisJoinPoint.getSignature().getName()Accessses to the parameterNames and parameterTypes fields of join points, that are not suitable for conversion to one of the toString() methods should be changed as follows. Field access like:
thisJoinPoint.parameterNamesthisJoinPoint.parameterTypesmust be changed to:
((CodeSignature)thisJoinPoint.getSignature()).getParameterNames()((CodeSignature)thisJoinPoint.getSignature()).getParameterTypes()